Thursday, December 23, 2010

Wilson House Architecture in Yarra Valley Victoria

Wilson House Architecture in Yarra Valley Victoria - hello friend how are you? welcome to our blog Home Design Group we know you are now looking for information about Wilson House Architecture in Yarra Valley Victoria You're lucky because we already provide super full of you who come to this blog, we show our article summarized from various sources of information credible about home design, well please continue reading:

You can also see our article on:


Wilson House Architecture in Yarra Valley Victoria

Designed by Denton Corker Marshall, this modern concrete wilson house design is located in Yarra Valley, Victoria. Two thin rectangular plates – roof and floor – lay into a gentle rise above the vineyard stretching down to the main road. The black metal floor plate is supported by a series of parallel black pigmented concrete walls set at right angles to it. One end rests on the hillside; the other cantilevers 11 metres beyond the supporting wall. The identical roof plate floats above, separated by full-height glazing on the front and ends, and on the back by two vine green sticks laid longitudinally between the plates.
Each plate is 50 metres long and 11 metres wide. Their singularity and clarity is reinforced by deep setbacks – two metres on the front and rear, and five metres on the cantilevered projection – to the external wall. The roof plate is supported by internal steel columns.
The lower lever, defined by the black concrete walls, contains entry, car parking, wine cellar, study and guest bedrooms. The upper level – conceptually a single space – contains the master bedroom, second bedroom, living, dining and kitchen.

A floor-to-ceiling glass wall with sliding external doors extends the full length of the house, and opens onto an upper level terrace stepping down to an outdoor swimming pool.

Floors are honed mid-grey pigmented concrete, and ceilings white plasterboard. Internal spaces are defined by sycamore panelled volumes inserted into the space, and held free of the ceiling and the long glazed wall.


you've finished reading and viewing information about Wilson House Architecture in Yarra Valley Victoria hopefully can provide benefits to you, helpful if you feel you can share this link https://dontlethereatcake.blogspot.com/2010/12/wilson-house-architecture-in-yarra.html so that more people know. thank you

Share on Facebook
Share on Twitter
Share on Google+

Related : Wilson House Architecture in Yarra Valley Victoria

  • Blairgowrie Court Residence by Frank Macchia This architectural residential project from australian architect Frank Macchia is located in the Melbourne suburb of Brighton. The Blairgowrie Court residence is a 4 ...
  • Modern King Residence by John Friedman Alice Kimm John Friedman Alice Kimm Architects has designed modern king residence situated in the Sunset Park neighborhood of Santa Monica. The white and green exterior pattern ...
  • CF Residence, by Thiago Bernardes and Paulo JacobsenThiago Bernardes and Paulo Jacobsen have designed this ultra modern CF residence for their client, Carlos Firme. The house features 4 bedroom layout with en-suite bathro ...
  • Minimalist Dream House Design IdeasSome people may have a limited land and space available to build their dream house. but living in a small limited space available could be very tricky if we know how to ...
  • Beaumaris House by Maddison Architects Beaumaris House is a Luxury Modern House designed by Maddison Architects and located in the Beaumaris suburb of Melbourne, Australia.From the architects:Formally, th ...

0 comments:

Post a Comment